LTD "Scientific and Technical Enterprise " TAMKOR ", founded in 1994, is a Ukrainian company specialized in manufacturing enamels and varnishes for anti-corrosion protection of equipment operated in chemically aggressive environments and conditions of high humidity for the oil refining, chemical and construction industries.
Enamels and paints based on polyurethane components with a low content of volatile organic compounds provide significant workplace safety and environmental benefits.
Our polyurethane- based enamels and varnishes have the following properties:
- high adhesion to metal, concrete, ceramics and various plastics;
- increased hardness, elasticity, impact resistance, wear resistance;
- abrasion resistance;
- frost resistance without reducing the basic physical and mechanical properties;
- resistance to organic solvents, solutions of inorganic acids, petroleum products, alcohols and hot solutions.
Scope
Oil refining, chemical, electrochemical, construction and food industries.
Ltd "Scientific and Technical Enterprise " "TAMKOR" manufactures and supplies the following products:
- Epoxy polyurethane-
- enamel EPU-33KR
- varnish EPU-042L
- Polyurethane -
- enamel PU 53-13E
- varnish PU 053-13L
- Alkydurethane enamels
- Antistatic enamels
Two-component epoxy-polyurethane-based varnish EPU 042L.
Enamel EPU-33KR is a two-component epoxy polyurethane enamel with high anticorrosive properties. It has high strength characteristics and adhesion to various materials.
It is recommended for use as a protective coating of facilities operated in aqueous, acidic, alkaline environments, as well as in contact with all types of petroleum products.
Enamel is frost-resistant, able to withstand cyclic loads of temperatures. In terms of impact resistance and vibration resistance, EPU-33KR enamel is superior to coatings traditionally used to protect metal from corrosion in severe operating conditions.
The advantage of EPU coating is in resistance to shock-deformation and vibration loads, naturally increases the service life and quality of protection of welds, prevents the formation of cracks and peeling in these places, typical of epoxy coatings. EPU-33K enamel corresponds to the requirements of State standards of Ukraine (DSTU) 4219-2003 "Steel pipelines, trunk pipelines", has obtained approval from the Ministry of Health for use in the food industry. Enamel can be used as a stand-alone anti-corrosion coating, and as a highly effective primer in various coating systems for alkyd, acrylic and alkydurethane paints.
Purpose:
It is used for protection of metal surfaces, concrete and reinforced concrete structures and buildings, which are operated in aggressive conditions of chemical and oil refining production and conditions of high humidity, as well as for protection of equipment in the oil and gas industry.
Appearance after application:film with smooth surface, free of wrinkles and pock marks
Colour: red-brown, gray
Mass fraction of non-volatile substances: 60-75%
Drying time of film: degree 3 at a temperature 20-25 ° C 2 - 4 hr
Consumption of enamel: 110-120 g/m2
EPU-33KR enamel consists of two components which are mixed immediatelybefore use.
Deliveries of EPU-33KR enamel are carried out in any container, convenient for the consumer.
Varnish EPU 042L
Two-component epoxy-polyurethane-based varnish.
Purpose:
It is used for anticorrosive protection of devices and equipment that work in contact with chemically aggressive environments and conditions of high humidity, and is also used as the last weatherproof protective layer in the coating system using EPU-33KR enamel
Colour: light-yellow
Mass fraction of non-volatile substances: 70-75%
Drying time of film: to degree 3 at a temperature 20-25 ° C: 2 - 4 hr
EPU 042L enamel consists of two components which are mixed immediatelybefore use.
Deliveries of EPU 042L enamel are carried out in any container, convenient for the consumer.
Enamel 53-13Е
Two-component polyurethane-based varnis.
Purpose:
It is used for anticorrosive protection of metal equipment and devices, structural plastic, concrete and other surfaces operated in aggressive environments and conditions of high humidity.
Appearance after application:film with smooth surface, free of wrinkles and
pock marks.
Mass fraction of non-volatile substances:: 60-70%
Drying time of film:to degree 3 at a temperature 20-25 ° C: 4 - 5 hr
Consumption of enamel: 100-110 g/m2
EPU 53-13E enamel consists of two components which are mixed immediatelybefore use.
Deliveries of EPU 53-13E enamel are carried out in any container, convenient for the consumer.
Varnish PU 053-13L
Two-component polyurethane-based varnish.
Purpose:
It is used for anticorrosive protection of metal equipment and devices, structural plastic and other surfaces operated in aggressive environments.
Appearance after application: film with smooth surface, free of wrinkles and pock marks
film with smooth surface, free of wrinkles and pock marks: 65-75%
Drying time of film to degree 3 at a temperature 20-25 ° C: 4 hr
Consumption of enamel: 90-100 g/m2
EPU 53-13L enamel consists of two components which are mixed immediatelybefore use.
Deliveries of EPU 53-13L enamel are carried out in any container, convenient for the consumer.
