Type: Enamel PF-115 "LIDA" is a suspension of pigments and fillers in pentaphthalic varnish with the addition of solvents, desiccant and special additives.
Scope: Enamel PF-115 "LIDA" is intended for painting metal, wood and other surfaces used indoors and in atmospheric conditions. The enamel is not facade.
Benefits: the enamel covering forms a flat, smooth surface, provides a weather-resistant, glossy coating; elastic, has good decorative and protective properties; one-component enamel, stable when stored, has excellent painting properties, which makes it easy to use; enamel is ideal for painting wooden surfaces that do not require high performance characteristics: residential and domestic wooden buildings and fences, as well as metal surfaces (fences, gratings, fences, etc.); enamel film is resistant to temperature changes from minus 50 ° С to plus 60 ° С
| Name of the indicator | Requirements of Technical Normative Legal Acts |
| Appearance | After drying, the enamel should form a smooth, uniform surface without delamination, pockmarks, streaks, wrinkles and foreign particles. A small shagreen is allowed |
| Сolour of enamel coating | Must be within the tolerance limits set by the RAL colour chart or colour samples |
| Conditional viscosity according to the viscometer type V3-246 with a nozzle diameter of 4 mm at a temperature of (20,0 ± 0,5) °C red, cherry, black other colours |
60-100 80-120 |
| Degree of grinding, µm, not more | 25 |
| Drying time of enamel to degree 3 at a temperature of (20 ± 2) ° С, h, not more red, cherry black other colours |
48 24 24 |
| Gloss of the film according to the FB-2 photoelectric gloss meter, %, not less | 50 |
| Film elasticity in bending, mm, not more | 1 |
| Film adhesion, points, no more one | 1 |
| Film strength upon impact with the U-1 device, cm, not less | 40 |
| The hardness of the enamel film, according to the pendulum device (type TML) (pendulum A), conventional units, not less | 0,1 |
| Resistance of coating to static effect at a temperature (20 ± 2) °C: water, h transformer oil, h 0.5% detergent solution, min |
2 24 15 |
Enamel PF-115 "LIDA" is a suspension of pigments and fillers in pentaphthalic varnish with the addition of solvents, desiccant and special additives.
Wooden surfaces must be cleaned of resinous substances, dried, sanded and dust-free before applying the enamel. To improve the protective and decorative properties, as well as to reduce the consumption of enamel, it is recommended to prime the unpainted surface with GF-021, GF-021 "L" primers. Various contaminants must be removed from the previously painted surface, the flaking coating must be completely removed, and the surface must be sanded and dust-free.
Before applying the enamel, metal surfaces must be completely cleaned of dust, rust, scale and other contaminants (it is necessary to remove the scoring, burrs, weld spatter; to round sharp edges, corners, teeth and welds; the surface must be free of grease, marking paint and substances such as mineral contaminants, water-soluble salts which affect the quality of surface preparation), sanded, degreased, dried and primed with GF-021 or GF-021 "L", or GF-0119, or GF-0119 "L" primers.
Previously painted surfaces must be cleaned of dust, grease, sanded, degreased, dried. Test painting should be done. In case of swelling or peeling, the old coating must be removed. To avoid moisture condensation, the temperature of the painted surface must be at least 3 ° C higher than the dew point temperature.
The consumption of enamel for a single-layer coating is 100 - 180 g / m2 without taking into account the complexity of the painted surface, the method of application, the color of the enamel, staff qualifications and other factors.
